lorexitech.com

Why-Is-My-Lorex-Motion-Detection-Not-Working-1

Why Is My Lorex Motion Detection Not Working?

A dependable option for monitoring your house or place of business are Lorex security cameras. What occurs, though, if the motion detection abruptly ceases functioning? Problems can occasionally occur whether you’re using Lorex smart motion detection or regular motion detection. This blog is for you if you are wondering, “Why is my Lorex motion detection not working?”

In this blog, we’ll explain the most frequent causes of motion detection failures and provide easy fixes.

 

Comprehending Lorex Camera Motion Detection

Understanding how Lorex motion detection operates is crucial before beginning any troubleshooting. Pixel-based motion detection, which detects pixel changes between video frames, is used by the majority of Lorex security cameras. More recent versions have Lorex Smart Motion Detection, which uses artificial intelligence to discern between humans, cars, and animals.

Depending on your setup, the camera may begin recording, sound an alarm, or both when motion is detected. Therefore, if these notifications cease functioning, you may feel annoyed and your property may not be safeguarded.

 

Typical Causes of lorex motion detection not working

1. Motion Detection Settings Are Disabled

This is the most prevalent and frequently disregarded problem. Authenticate that Lorex motion detection is activated in the settings if it isn’t operational.

 

Actions to take:

  • Use the Lorex Camera Login mobile app or site to access your system.
  • Go to the tab for Motion Detection.
  • Make sure each camera has motion detection activated.
 

2. The Sensitivity Level Is Too Low

The camera may miss little movements if the sensitivity is set too low. In addition, it may affect false alarms if it is very high.

 

Actions to take:

  • Navigate to the settings for motion detection.
  • Experiment with different motion levels and raise the sensitivity slider.
 

3. There Is No Set Motion Zone Appropriately

Users can choose particular areas where motion should be detected using Lorex. The camera could overlook action outside of these zones if they are not set up properly.

 

Actions to take:

  • Verify the Motion Zones configuration.
  • Make sure you have chosen the full region you wish to have monitored.
  • Avoid inadvertently hiding crucial areas.
 

4. Outdated Firmware

System flaws, such as problems with Lorex smart motion detection not working, might be caused by an outdated firmware version.

 

Actions to take:

  • Open the Lorex Camera Login dashboard and log in.
  • Go to the firmware update or system information area.
  • If the most recent version is available, update it.
 

5. Problems with Camera Positioning

Motion detection may not work if your camera is aimed at extremely shiny surfaces or places with erratic illumination.

 

Actions to take:

  • To reduce glare from lights or windows, move the camera.
  • Steer clear of busy roadways, flags, and swaying trees.
 

6. Notification Settings for Mobile Apps

Sometimes the camera detects motion, but there are no warnings sent to your phone.

 

Actions to take:

  • Permissions for app notifications on your phone.
  • Make sure alert schedules aren’t set to “Do Not Disturb” when motion events occur.
 

7. Recording or Storage Configurations

If your storage is full or your recording settings aren’t set up properly, your Lorex cameras could not capture motion events.

 

Actions to take:

  • Examine the storage device or hard disk.
  • The recording schedule should be set to either “Motion” or “Motion + Continuous.”
 

Particular Things to Take Into Account for Lorex Smart Motion Detection

If Lorex Smart Motion Detection isn’t functioning for you, the AI settings may be the problem. You may choose from a variety of detection kinds with these cameras, including people, cars, animals, etc.

  • Verify that AI detection is activated.
  • Go to the Smart Detection settings on your camera.
  • Choose the motion categories you want it to recognize, such as vehicle or person.
  • Make sure smart detection functions are supported by the firmware. Firmware upgrades are necessary for certain older models in order to access AI functionality.
 

How to Get to the Settings of Your Lorex Camera

  • For troubleshooting to be effective, you must have adequate access to your settings.
  • To log in to Lorex Camera, go to https://www.lorex.com and select “Login” in the upper right corner.
  • Enter your login information to access the dashboard.
  • Go to Motion Detection under Device Settings.
  • As an alternative, you may remotely view and modify settings by using the Lorex Home app on your smartphone.
 

When to Get in Touch with Help

It might be time to get in touch with technical assistance if none of these fixes fix your lorex motion detection not working problem. There may be a network problem, a firmware upgrade gone wrong, or a hardware flaw. Don’t forget to supply:

  • The model number of your camera
  • An overview of your prior attempts
  • Details of the firmware version
 

Final thoughts

 

It might be annoying when lorex motion detection not working, particularly if you depend on your system for home or business security. There’s generally an obvious way to get everything back in working order, whether it’s a straightforward settings change or something more complicated like an outdated firmware.

To maintain an eye on performance, take the initiative to routinely use your Lorex Camera Login, check settings, and keep firmware updated. You can probably fix your lorex smart motion detection not working problem without expert assistance if you do a little troubleshooting.