lorexitech.com

Unless otherwise stated, this website is not related or associated with any third-party brand. Brands, trademarks, logos, and company names are merely used as examples.

How To Fix Lorex camera night vision not working Issue?

How To Fix Lorex camera night vision not working Issue?

A well-known brand for dependable and cutting-edge security cameras for residences and commercial buildings is Lorex. The capacity of these gadgets to capture crisp video at night using infrared technology is one of their most useful capabilities. 

However, consumers occasionally run into problems where the Lorex camera night vision not working, which may be rather annoying. Don’t panic if your camera isn’t going into night vision mode or if the nighttime image quality is too bad; there are a few things you may try before contacting technical assistance. 

We’ll go over the typical reasons and detailed solutions for the Lorex security camera night vision not functioning problem in this article. These troubleshooting techniques can assist in restoring clear nighttime surveillance, regardless of whether you’re using a wired or wireless model. 

What Causes Lorex Cameras to Lose Night Vision? 

 

It’s crucial to comprehend the potential causes of your Lorex night vision camera’s malfunction before attempting any fixes. Among the most frequent reasons are: 

Unclean or Blockage in the Camera Lens 

  • Infrared light can be blocked by dust, dirt, or spider webs surrounding the IR sensor, making it harder to see at night. 
 

Not Enough Power Source 

  • Since the camera turns on infrared LEDs, night vision uses more power. The night vision may not work if the power source is poor. 
 

Light Sources Close by 

  • The Lorex camera night vision not working transition to infrared mode if there are bright outside light sources (such as porch lights, street lighting, or automobile headlights). 

Inaccurate camera settings 

  • It’s possible that improper night vision settings were made during Lorex Camera Setup, which prevented the automated transition from day to night mode. 
 

Problems with Camera Positioning 

  • When cameras are positioned too near reflecting objects, such as windows or walls, infrared light may reflect back, producing glare and hazy video. 
 

Firmware or Hardware Issues 

  • Hardware issues or outdated firmware might potentially result in night vision issues. 
 

How to Fix lorex security camera night vision not working Issues Step-by-Step 

 

After learning the typical causes, let’s look at workable solutions to remedy the Lorex camera night vision not working problem. 

  1. Examine the IR sensors and camera lens. 
  • Using a gentle microfiber cloth, begin by cleaning the infrared sensors and camera lens. 
  • The IR light can be blocked by even tiny particles of dirt or spider webs, giving the impression that the camera lacks night vision. 
 

Expert advice: Keep your exterior cameras clean on a regular basis, particularly if they are subjected to dust, rain, or insects. 

  1. Check the Power Source 
  • Make sure there is enough electricity going to your camera. The camera may not get enough power if the power adapter is broken or if it is attached via an extension cord since night vision uses extra energy. 
  • Whenever feasible, use the original Lorex power adaptor. 
  • If your system is wired, look for any broken or loose cords. 
 
  1. Remove Interference from External Light 

Your camera could not go into infrared mode if it is positioned next to a strong porch light or streetlight. Try the following: 

  • To check if night vision activates, temporarily turn off external lights. 
  • To lessen interference from surrounding light sources, move the camera. 
 
  1. Modify the camera’s settings 

Check if night vision is turned on by going to the Lorex Camera Setup menu. You may manually switch between color and black-and-white night mode on some models. 

Actions to take: 

  • Launch the DVR/NVR system or the Lorex app. 
  • Go to the settings for the camera. 
  • Make sure “Auto Mode” or “IR Night Vision” are turned on. 
 
  1. Make the Best Camera Position 
  • Keep your Lorex night vision camera away from glossy surfaces, glass windows, and walls. White glare can result from infrared light reflecting back, rendering the video useless. 
  • The camera should be angled slightly downward and away from reflecting surfaces. 
 
  1. Update the software and firmware 
  • Outdated firmware might occasionally be the source of the Lorex security camera’s night vision problem. To see what updates are available, visit the Lorex app or website. 
  • Get the most recent firmware update for your camera. 
  • After upgrading, restart the device. 
 
  1. Reset the Camera 
  • Try doing a factory reset if none of the aforesaid actions crack the issue. This may fix any setup problems and return the camera to its original settings. 

Note: After the reset, be sure to adjust your settings, including any customized features like Lorex Motion Detection Not Working

  1. Examine in Total Darkness 
  • Occasionally, insufficient darkness in the surroundings prevents night vision from activating.  
  • To observe if your camera’s infrared LEDs turn on (often manifested as a subtle red glow), test it in a completely dark room or at night when all lights are out. 
 

Avoiding Future Issues with Night Vision 

To guarantee that your Lorex night vision camera operates well throughout time, do the following preventative steps: 

  • Regularly clean the lens of your camera. 
  • Make sure the power source is robust and steady. 
  • Cameras should be positioned carefully to prevent reflecting surfaces and light interference. 
  • Update your app and firmware. 
  • Verify that the day and night modes are operating by conducting tests once a month. 
 

Final thoughts 

During the most vulnerable hours, having a Lorex camera night vision not working could jeopardize the security of your house or place of business. Thankfully, the majority of these issues may be resolved with straightforward troubleshooting techniques like lens cleaning, power supply inspection, setting adjustments, or camera repositioning. Clear nighttime surveillance and peace of mind may be guaranteed by taking preventative action and servicing your system on a regular basis. After all, dependable security around-the-clock depends on a properly operational Lorex night vision camera. 

FAQs 

Can firmware updates fix Lorex night vision issues? 

Yes, by fixing bugs in the software and improving performance, firmware upgrades can resolve problems with night vision. For seamless operation and enhanced infrared performance, always keep the firmware for your Lorex camera updated. 

What should I do if troubleshooting doesn’t fix night vision? 

Get in touch with Lorex technical support if troubleshooting doesn’t work. For dependable nighttime security, persistent problems might be a sign of malfunctioning gear, such infrared LEDs or sensors, that has to be replaced, repaired professionally, or serviced under warranty. 

My Lorex camera night vision is blurry. What should I do? 

Adjust camera positioning, clear obstacles, and clean the lens and infrared sensors if night vision is hazy. Avoid reflecting surfaces that might produce infrared glare and make sure you have the right focus.